Sailing The following areas of your sail, you should regularly check wear damage: -- All dents, wrinkles and large scratches in monofilm or X-Ply material, particularly in the area of the tree fork, bottom, clew, Segeltops and leech of the sail.
-- The area in which the threaded Vorliekstrecker is the eyelets at the clew and the stopper on Segeltop, in the mast is introduced.

Make sure that your sails long lives:
1. Build your sail, if possible, always on soft turf at. A construction manual with any Neil Pryde Segelmitgeliefert. This set-up instructions, you can also download our website at: http:///
2. Sails are easily damaged when they Aufriggen the unwary are stored by the wind and turn. Be especially careful when setting up and Abriggen.
3. Protect your sails from sunlight when not in use. The harmful sun rays can cause verfrühterMaterialermüdung of monofilm lead. Build your sails immediately after use, or cover it with a protective tarp sails.
4. Rigging your sail from the wind, roll it to store from the top from close together and push it into the sail bag - so protect yourself before the monofilm early fatigue.
5. We recommend that if possible sail horizontally on the ground to store. Do not place heavy objects on top of the sail so stored. If kept in a vertical position should the mast on the ground.
6. Rinse your sails with fresh water, if it for a longer period of time.
7. Stubborn stains can with warm water and mild detergent to be removed.




Masts
The carbon fiber mast of your are sensitive and can be fitted to a hard object, through pressure and longer exposure to the sun serious damage. Such damage is not always visible. Make sure that you in the event of a Mastbruchs never be in a dangerous situation and always made sure its own power to the coast can come back. Please see more information about the care and maintenance of your Neil Pryde mast attached to the product manual or visit our Neil Pryde website:


The following areas should be regularly checked for wear damage are:
- The area on which the boom head is attached
- The areas in which the mast touching Camber
- The connection between the base and sleeve Top
Make sure that your mast long lives:
1. Protect your mast from impact or pressure. The mast can be done by dropping or bumping severely damaged. Such damages are not necessarily visible.
2. Build your mast always directly after use. We recommend you always padded mast for storage and transport to use.
3. Carbon masts as well as other poles tightly attached to the boom front pieces damaged. The easiest way to protect your pole from such damage caused by exclusive use of Neil Pryde booms.
4. Use Neil Pryde mast. The mast must be closely attached to the Mastbase fit and at least 11.5 cm / 5 "in the mast there. The mast should not exceed 40 cm / 15.75 "extended. Use the 48 cm long Neil Pryde extension only if your mast for more than 28 cm must be extended. Use of the Neil Pryde Mast ONE only ONE original NP mast.
5. When using a two-piece mast, make sure that both Mastteile remain firmly connected after they pushed into the mast were. Slide your hand along the mast to the seat of the Masthälften to check before you take the whole Luff enforce. A gap between the two Mastteilen may be under strain to fracture of the upper sleeve lead connection.
6. Mastfüße, Mastverbindungshülsen, mast, sail camber and other components should be free from sand and dirt to be. Make sure before construction to ensure that all Riggkomponenten are clean. Use warm water and mild detergent to remove stubborn dirt.
7. Please be aware that a mast even when used in smaller waves and the shore break can brake. Mastbruch when used in shaft stations is usually not processed - or material error, and is to be the result of the warranty.
8. Although Neil Pryde carbon masts with a UV resistant protective coating must be both mast and other windsurfing equipment for the Windsurfing before sunlight.




Booms and renewals
Your Booms and extensions are fragile and can be fitted to a hard object, through prolonged exposure to the sun and by corrosion (aluminum Booms and / or renewals) serious damage. Such damage is not always visible. Make sure that you in the event of a boom extension or never break into a dangerous situation and always made sure its own power to the coast can come back. Please see more information about the care and maintenance of your fork tree Neil Pryde Neil Pryde, or your renewal of the attached product manual or visit our Neil Pryde website:

The following areas of the fork tree should be regularly checked for wear damage are:


- All parts of the front and tail: The lever of the front piece, the clamps and screws.
- The Trimmschot.
- All Verstellhebel at Holmen.
Make sure that your boom and your life-long extension:
1. Make sure that you Booms and mast after its use from the sun-protected storage.
2. All moving parts must be sand - and kept free dreck. Rinse your boom regularly with fresh water, so that there is no tough dirt can settle. Regular washing prevents the corrosion of aluminum booms and prolongs their life.
3. Let the fork of the tree Clipverschlüsse not open when you do not use.
4. Let the non-renewal of no use if the mast, as this could corrode.




Mastfüße The universal joint of the mast used tendon is exposed to extreme forces and should be periodically reviewed and if necessary be replaced when signs of wear occur. The polyurethane-string has a limited, approximate life of up to 120 hours and after this period should be automatically replaced. Please see more information about the use, care and maintenance of your mast attached to the product manual or visit our Neil Pryde website:
1. The following components of the Mastfußsystems should be regularly checked for wear damage are:

The tendon
The rubber material of the polyurethane tendon should be no cracks or defects. This check simply by entering the string at 90 degrees in 4 different directions and bend the center of the tendon observed. Appears to be a crack, the string should be replaced immediately.

The tendon holder
Both the upper and the lower retaining bolt for the string should fit snugly. This restraint can bolt with an Allen wrench to tighten.

Mastfußplatte
The Mastfußplatte should be consistent with the lower end of the tendons sit flush mount. Between these parts there can be no game type. These parts are sitting too loose, the bolts are tightened inside.


XT Powerbase - Adapter The adapter cups cups should be used with the upper tendon holder sit flush. If the adapter cup loosely sitting inside the mother must be tightened.


UXT Power Bases - U-Pin
The U pin should be compatible with the upper tendons sit flush mount and have no game.



If one of your products Neil Pryde one of the above-mentioned wear damage, please contact immediately your Neil Pryde dealer. A list of all Neil Pryde contact details, visit the Neil Pryde website